Tilt-turn aluminum window shown in turn position and tilt position with handle orientations marked

TT-300 Aluminum Tilt & Turn Windows — Passive House Ready, Uw ≤1.2

European-style tilt & turn aluminum windows with ultra-low U-values and slim sightlines — engineered to meet passive-house thermal targets. Every value below is engineered and documented — send your openings and performance targets, and our engineers confirm feasibility before quoting.

TT-300 tilt & turn window — Lansen factory, Foshan

TT-300 Engineering Parameters

Configuration ranges depend on glass build and panel size. Triple-glazed and laminated upgrades are available on request.

Parameter Value Unit Test Standard
U-Value (Uw) 1.2 – 1.4 W/m²K EN 14351-1
SHGC 0.30 – 0.45 — EN 410
Design Pressure (DP) +55 / -65 ±psf ASTM E330
Water Tightness 600 Pa EN 1027
Air Infiltration ≤ 0.50 m³/h·m² EN 1026
Acoustic (Rw) 36 – 42 dB EN ISO 717-1
Max Panel (W×H) 1.2 × 2.4 m m —
Frame Depth 75 mm —
Hardware Cycles 20,000+ cycles EN 13126

System Specification

  • Glass tested: 4mm tempered + 16A warm-edge + 4mm + 16A warm-edge + 4mm dual Low-E tempered
  • Gasket: EPDM triple-seal

Customization & Delivery

Sizes to your rough openings, RAL powder coat or anodized finishes, glass builds per climate zone, and hardware programs to match your market. Part of the full aluminum windows line — inspected under the same pre-shipment process as every Lansen order, with a line-item quote within 24 hours.

Get a TT-300 Parameter Quote →

Related Reading

TT-300 is rated Uw 1.2 – 1.4 W/m²K (0.21 – 0.25 Btu/h·ft²°F) — the best-performing system in the range. See whole-window performance data for all 10 Lansen systems — U-value, SHGC, DP rating, water and air figures, with the test standard behind each one.