CW-100 Aluminum Casement Windows — DP Rated, Thermally Broken

Engineering-grade aluminum casement windows engineered for hurricane zones and cold climates alike — high design pressure, full-perimeter multi-point locking, and three thermal-break depths. Every value below is engineered and documented — send your openings and performance targets, and our engineers confirm feasibility before quoting.

CW-100 casement window — Lansen factory, Foshan

CW-100 Engineering Parameters

Configuration ranges depend on glass build and panel size. Triple-glazed and laminated upgrades are available on request.

Parameter Value Unit Test Standard
U-Value 1.8 – 2.4 W/m²K NFRC 100 / EN 673
SHGC 0.35 – 0.55 — NFRC 200
Design Pressure (DP) +65 / -75 ±psf ASTM E330
Water Tightness 600 – 750 Pa ASTM E331
Air Infiltration ≤ 0.10 cfm/ft² ASTM E283 at 1.57 psf
Acoustic (STC) 32 – 38 dB ASTM E90
Opening Type Side-hung (casement) — —
Max Panel (W×H) 0.9 × 2.1 m m —
Frame Depth 65 / 75 / 85 mm —
Thermal Break 24mm PA66 GF25 mm —

System Specification

  • Glass tested: 5mm tempered + 12A argon + 5mm Low-E tempered;4mm tempered + 16A warm-edge + 4mm + 16A warm-edge + 4mm dual Low-E tempered
  • Hardware: multi-point locking system,stainless steel friction hinges

Customization & Delivery

Sizes to your rough openings, RAL powder coat or anodized finishes, glass builds per climate zone, and hardware programs to match your market. Part of the full aluminum windows line — inspected under the same pre-shipment process as every Lansen order, with a line-item quote within 24 hours.

Get a CW-100 Parameter Quote →

Related Reading

CW-100 is rated Uw 1.8 – 2.4 W/m²K (0.32 – 0.42 Btu/h·ft²°F). See whole-window performance data for all 10 Lansen systems — U-value, SHGC, DP rating, water and air figures, with the test standard behind each one.