SW-200 Aluminum Sliding Windows — Large Format, High Water Tightness

Heavy-duty aluminum sliding windows for large openings — high water tightness and wind resistance for coastal and monsoon climates. Every value below is engineered and documented — send your openings and performance targets, and our engineers confirm feasibility before quoting.

SW-200 sliding window — Lansen factory, Foshan

SW-200 Engineering Parameters

Configuration ranges depend on glass build and panel size. Triple-glazed and laminated upgrades are available on request.

Parameter Value Unit Test Standard
U-Value 2.0 – 2.8 W/m²K NFRC 100 / EN 673
SHGC 0.40 – 0.65 — NFRC 200
Design Pressure (DP) +50 / -60 ±psf ASTM E330
Water Tightness ≥ 450 Pa ASTM E331 / AS2047
Air Infiltration ≤ 0.20 cfm/ft² ASTM E283 at 1.57 psf
Acoustic (STC) 28 – 34 dB ASTM E90
Max Panel Width ≤ 2.4 m —

System Specification

  • Glass tested: 5mm tempered + 12A argon + 5mm Low-E tempered

Customization & Delivery

Sizes to your rough openings, RAL powder coat or anodized finishes, glass builds per climate zone, and hardware programs to match your market. Part of the full aluminum windows line — inspected under the same pre-shipment process as every Lansen order, with a line-item quote within 24 hours.

Get a SW-200 Parameter Quote →

Related Reading

SW-200 is rated Uw 2.0 – 2.8 W/m²K (0.35 – 0.49 Btu/h·ft²°F). See whole-window performance data for all 10 Lansen systems — U-value, SHGC, DP rating, water and air figures, with the test standard behind each one.