FD-200 Aluminum French Doors — Classic Swing, Modern Performance

Aluminum French doors with multi-point locking — thermally broken and weather-sealed for residential and light commercial use. Every value below is engineered and documented — send your openings and performance targets, and our engineers confirm feasibility before quoting.

FD-200 french door — Lansen factory, Foshan

FD-200 Engineering Parameters

Configuration ranges depend on glass build and panel size. Triple-glazed and laminated upgrades are available on request.

Parameter Value Unit Test Standard
U-Value 1.8 – 2.4 W/m²K NFRC 100
SHGC 0.35 – 0.55 — NFRC 200
Design Pressure (DP) +50 / -60 ±psf ASTM E330
Water Tightness 500 – 600 Pa ASTM E331
Air Infiltration ≤ 0.15 cfm/ft² ASTM E283
Acoustic (STC) 30 – 36 dB ASTM E90
Max Leaf (W×H) 0.85 × 2.1 m —
Thermal Break 20mm PA66 GF25 mm —

System Specification

  • Glass tested: 5mm tempered + 12A argon + 5mm Low-E tempered
  • Frame: 6063-T6 aluminum,20mm PA66 GF25 thermal break strip

Customization & Delivery

Sizes to your rough openings, RAL powder coat or anodized finishes, glass builds per climate zone, and hardware programs to match your market. Part of the full aluminum doors line — inspected under the same pre-shipment process as every Lansen order, with a line-item quote within 24 hours.

Get a FD-200 Parameter Quote →

Related Reading

FD-200 is rated Uw 1.8 – 2.4 W/m²K (0.32 – 0.42 Btu/h·ft²°F). See whole-window performance data for all 10 Lansen systems — U-value, SHGC, DP rating, water and air figures, with the test standard behind each one.