Aluminum door system — Lansen factory, Foshan

ED-400 Aluminum Entry Doors — Security Meets Thermal Performance

Engineered aluminum entry doors combining security and thermal performance — custom sizing and finish matching available. Every value below is engineered and documented — send your openings and performance targets, and our engineers confirm feasibility before quoting.

ED-400 entry door — Lansen factory, Foshan

ED-400 Engineering Parameters

Configuration ranges depend on glass build and panel size. Triple-glazed and laminated upgrades are available on request.

Parameter Value Unit Test Standard
U-Value 1.6 – 2.0 W/m²K NFRC 100
SHGC 0.25 – 0.45 — NFRC 200
Design Pressure (DP) +55 / -65 ±psf ASTM E330
Water Tightness 600 Pa ASTM E331
Air Infiltration ≤ 0.10 cfm/ft² ASTM E283
Acoustic (STC) 32 – 38 dB ASTM E90
Max Panel (W×H) 1.2 × 2.4 m —
Glazed Insert ≤ 40mm triple-glazed mm —
Thermal Break 35mm PA66 GF25 mm —

System Specification

  • Glass tested: 5mm tempered + 12A argon + 5mm Low-E tempered

Customization & Delivery

Sizes to your rough openings, RAL powder coat or anodized finishes, glass builds per climate zone, and hardware programs to match your market. Part of the full aluminum doors line — inspected under the same pre-shipment process as every Lansen order, with a line-item quote within 24 hours.

Get a ED-400 Parameter Quote →

Related Reading

ED-400 is rated Uw 1.6 – 2.0 W/m²K (0.28 – 0.35 Btu/h·ft²°F). See whole-window performance data for all 10 Lansen systems — U-value, SHGC, DP rating, water and air figures, with the test standard behind each one.